Adding a User for Outgoing IPv6 FTP Connections

To add a new user for outgoing FTP connections, press the F6 key from the Work withClient FTP Security IPv6 screen (STRAUD > 11 > 6), as shown in Setting Additional Controls for Outgoing IPv6 FTP Connections.

The Add FTP Client User IPv6 screen appears:

​                           ​ Add FTP Client User IPv6​                                                                                                              ​ Type information, press Enter.                                                ​    ​ User  . . . . . . . . .​ ​           ​              ​ Name, generic*, User Group, ​                                                    ​ F4 for list                 ​                                                                                                                               ​ Prfx​ 1=Allow​                      ​ Outgoing IPv6 Address​                        ​ Lngh​ 2=Reject​     ​ Text​           ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​  ​                                               ​    ​  ​  ​  ​                      ​                                                                    ​      More...​  ​ F3=Exit​  ​ F4=Prompt​  ​ F11=Alternate view​  ​ F12=Cancel ​                          ​                                                                                                                                                                  ​

Enter the name of the new user or group in the User field. This can be a specific or generic* name. For a list of possible values, press the F4 key.

The body of the screen is made up of lines that can refer to different IPv6 address ranges. Possible values include:

IPv6 Address

The IPv6 address for the range of addresses. In addition to an IPv6 address, you can set this field to *ALL for rules applied to all IPv6 ranges that aren't otherwise specified.

Address prefix length

The length of the IPv6 address prefix. This can be set to from 1-128.

1=Allow 2=Reject

How Firewall responds to requests by the user for outgoing FTP connections to this IPv6 range. Possible values include:

• 1: Accept requests
• 2: Reject requests

Text

A free-form text description of the rule.